Doctor summary (to see all details, run flutter doctor -v): [√] Flutter (Channel stable, v1.17.1, on Microsoft Windows [Version 6.1.7601], locale zh-TW) [X] Android toolchain - develop for Android devices X Unable to locate Android SDK. Install Android Studio from: https://developer.android.com/studio/index.html On first launch it will assist you in installing the Android SDK components. (or visit https://flutter.dev/docs/get-started/install/windows#android-setup for detailed instructions). If the Android SDK has been installed to a custom location, set ANDROID_SDK_ROOT to that location. You may also want to add it to your PATH environment variable. [!] Android Studio (not installed) [√] VS Code, 64-bit edition (version 1.45.1) [!] Connected device ! No devices available ! Doctor found issues in 3 categories.
docker pull gitlab/gitlab-ce docekr run --detach --publish 8787:80 --name gitlab gitlab/gitlab-ce因為是 detach，所以 run as daemon..
$ docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 4d9e7128295e gitlab/gitlab-ce "/assets/wrapper" 8 seconds ago Up 3 seconds (health: starting) 22/tcp, 443/tcp, 0.0.0.0:8787->80/tcp gitlab這時候，開啟 ip:8787 是不通的..
docker attach gitlab進去後，會看到他在 run starting sequence 的 output，代表還沒啟動完畢...
-- attach 一個啟動時是 daemonize 的 container，好像退不出來... 所以用 docker logs -f gitlab之後用 any-host-ip:8787 舊可以access 到 gitlab login 畫面了。
$ docker exec -it gitlab bash root@1b10f96444f4:/# gitlab console -e production Unknown command. Run `gitlab help` for a list of available commands. root@1b10f96444f4:/# gitlab-rails console -e production -------------------------------------------------------------------------------- Ruby: ruby 2.7.5p203 (2021-11-24 revision f69aeb8314) [x86_64-linux] GitLab: 14.8.2 (c7be43f6dd3) FOSS GitLab Shell: 13.23.2 PostgreSQL: 12.7 ------------------------------------------------------------[ booted in 20.47s ] Loading production environment (Rails 6.1.4.6) irb(main):001:0> user = User.where(id: 1).first => #<User id:1 @root> irb(main):002:0> user.password = 'charles' => "charles" irb(main):003:0> user.password_confirmation = 'charles' => "charles" irb(main):004:0> user.save => false irb(main):005:0> user.password = 'charles123' => "charles123" irb(main):006:0> user.password_confirmation = 'charles123' => "charles123" irb(main):007:0> user.save => true irb(main):008:0> exit root@1b10f96444f4:/#exit exit
efault admin account has been configured with following details: Username: root Password: You didn't opt-in to print initial root password to STDOUT. Password stored to /etc/gitlab/initial_root_password. This file will be cleaned up in first reconfigure run after 24 hours.所以，應該去這裡(/etc/gitlab/initial_root_password) 看...
sudo docker run --detach \ --hostname gitlab.example.com \ --publish 443:443 --publish 80:80 --publish 22:22 \ --name gitlab \ --restart always \ --volume $GITLAB_HOME/config:/etc/gitlab \ --volume $GITLAB_HOME/logs:/var/log/gitlab \ --volume $GITLAB_HOME/data:/var/opt/gitlab \ --shm-size 256m \ gitlab/gitlab-ee:latest要先export GITLAB_HOME
Usage: tio [] Options: -b, --baudrate Baud rate (default: 115200) -d, --databits 5|6|7|8 Data bits (default: 8) -f, --flow hard|soft|none Flow control (default: none) -s, --stopbits 1|2 Stop bits (default: 1) -p, --parity odd|even|none Parity (default: none) -o, --output-delay Output delay (default: 0) -n, --no-autoconnect Disable automatic connect -l, --log Log to file -m, --map Map special characters -v, --version Display version -h, --help Display help See the man page for list of supported mapping flags. In session, press ctrl-t q to quit.
[tio 10:33:36] Key commands: [tio 10:33:36] ctrl-t ? List available key commands [tio 10:33:36] ctrl-t b Send break [tio 10:33:36] ctrl-t c Show configuration [tio 10:33:36] ctrl-t h Toggle hexadecimal mode [tio 10:33:36] ctrl-t l Clear screen [tio 10:33:36] ctrl-t q Quit [tio 10:33:36] ctrl-t s Show statistics [tio 10:33:36] ctrl-t t Send ctrl-t key code
ar1.FullReset()
ar1.SOPControl(2)
ar1.Connect(15,921600,1000)
ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr16xx_radarss.bin")
ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr16xx_masterss.bin")
ar1.PowerOn(1,1000,0,0)
ar1.RfEnable()
設定Chirp, Frame and Capture Parameters
Int32 ar1.ChanNAdcConfig(UInt16 Tx0En, UInt16 Tx1En, UInt16 Tx2En, UInt16 Rx0En, UInt16 Rx1En, UInt16 Rx2En, UInt32 Rx3En, Int32 BitsVal, UInt32 FmtVal, UInt32 IQSwap)
- Static device config API which defines configure both the Transmiter and Reciever channels of Radar device and also ADC data format output
_I_ UInt16 Tx0En - Tx0 channel
_I_ UInt16 Tx1En - Tx1 channel
_I_ UInt16 Tx2En - Tx2 channel
_I_ UInt16 Rx0En - Rx0 channel
_I_ UInt16 Rx1En - Rx1 channnel
_I_ UInt16 Rx2En - Rx2 channel
_I_ UInt32 Rx3En - Rx3 channel[b15:0] + (CascadePinOutCfg[b31:16] b16:ClkOutMasterDis, b17:SynOutMasterDis, b18:ClkOutSlaveEna, b19:SynOutSlaveEna, b20:IntLOMasterEna, b21:OSCClkOutMasterDis)
_I_ Int32 BitsVal - Number of ADC bits
_I_ UInt32 FmtVal - ADC output format[b15:0] + FullScaleReductionFactor[b31:16]
_I_ UInt32 IQSwap - ADC Mode[b15:0] + CascadeMode[b31:16](Single Chip: 0x0000, MultiChip Master:0x0001, MultiChip Slave:0x0002)
Int32 ar1.LPModConfig(Int32 AnaChan, Int32 LpAdcMod)
- LP Mod Config API which defines both Configure the ADC Mode and analog filter channel format
_I_ Int32 AnaChan - Analog filter Chananel
_I_ Int32 LpAdcMod - ADC Mode
command ...
ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0) ar1.LPModConfig(0, 1) ar1.RfInit()
[R4 Device/Type: iwr68xx/xwr68xx] Building file: ./mss/mss_main.c "./mss/mss_main.c", line 1853: error: identifier "SOC_XWR16XX_MSS_ADCBUF_BASE_ADDRESS" is undefinedSOC_XWR16XX_MSS_ADCBUF_BASE_ADDRESS 定義在 /common/sys_common_xwr16xx_mss.h
#if (defined(SOC_XWR16XX)) #ifdef SUBSYS_MSS #include所以要找 SOC_XWR16XX 有沒有 define:#endif
mmwave_sdk.mak:# PLATFORM_DEFINE : SOC_XWR14XX, SOC_XWR16XX, SOC_XWR18XX, SOC_XWR68XX mmwave_sdk_xwr16xx.mak:PLATFORM_DEFINE = SOC_XWR16XXmmwave_sdk.make:
ifeq ($(MMWAVE_SDK_DEVICE), awr14xx) include $(MMWAVE_SDK_INSTALL_PATH)/ti/common/mmwave_sdk_xwr14xx.mak else ifeq ($(MMWAVE_SDK_DEVICE), awr16xx) include $(MMWAVE_SDK_INSTALL_PATH)/ti/common/mmwave_sdk_xwr16xx.mak ..所以要找 MMWAVE_SDK_DEVICE..
@REM Select your device. Options (case sensitive) are: awr14xx, iwr14xx, awr16xx, iwr16xx, awr18xx, iwr18xx, awr68xx, iwr68xx set MMWAVE_SDK_DEVICE=iwr68xx要改 awr16xx
call C:/ti/mmwave_sdk_03_04_00_03/packages\scripts\ImageCreator\append_bin_crc\gen_bincrc32.exe xwr16xx_mmw_demo.bin
>>>def new_range(n):
... print('start')
... i = 0
... while i < n:
... print('a')
... yield i
... i += 1
...
...c = new_range(10)
...print(next(c))
start
a
0
...print(next(c))
a
1
可以對照一下function 內的 print('start') 和 print('a') 出現的位置。