mmwave studio , lua script

mmWave Studio 提供 Lua shell, 可以 load and run lua script。
參考 studio 的 demo script，和 openradar 的 script，合併成一個可以用 studio 的 postprocess 的 capture script.

ar1.XX 的function 沒有文件，只有在 lua shell 用 help 命令查看一下，要列出所有function 也不行 (我不知道方法)

初始化

ar1.FullReset()
ar1.SOPControl(2)
ar1.Connect(15,921600,1000)
ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr16xx_radarss.bin")
ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr16xx_masterss.bin")
ar1.PowerOn(1,1000,0,0)
ar1.RfEnable()

設定Chirp, Frame and Capture Parameters
先看一下說明...

Int32 ar1.ChanNAdcConfig(UInt16 Tx0En, UInt16 Tx1En, UInt16 Tx2En, UInt16 Rx0En, UInt16 Rx1En, UInt16 Rx2En, UInt32 Rx3En, Int32 BitsVal, UInt32 FmtVal, UInt32 IQSwap) 
    -  Static device config API which defines configure both the Transmiter and Reciever channels of Radar device and also ADC data format output
_I_ UInt16 Tx0En  - Tx0 channel
_I_ UInt16 Tx1En  - Tx1 channel
_I_ UInt16 Tx2En  - Tx2 channel
_I_ UInt16 Rx0En  - Rx0 channel
_I_ UInt16 Rx1En  - Rx1 channnel
_I_ UInt16 Rx2En  - Rx2 channel
_I_ UInt32 Rx3En  - Rx3 channel[b15:0] + (CascadePinOutCfg[b31:16] b16:ClkOutMasterDis, b17:SynOutMasterDis, b18:ClkOutSlaveEna, b19:SynOutSlaveEna, b20:IntLOMasterEna, b21:OSCClkOutMasterDis)
_I_ Int32 BitsVal  - Number of ADC bits
_I_ UInt32 FmtVal  - ADC output format[b15:0] + FullScaleReductionFactor[b31:16]
_I_ UInt32 IQSwap  - ADC Mode[b15:0] + CascadeMode[b31:16](Single Chip: 0x0000, MultiChip Master:0x0001, MultiChip Slave:0x0002)



Int32 ar1.LPModConfig(Int32 AnaChan, Int32 LpAdcMod)
    - LP Mod Config API which defines both Configure the ADC Mode and analog filter channel format
_I_ Int32 AnaChan  - Analog filter Chananel
_I_ Int32 LpAdcMod  - ADC Mode

command ...

ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
ar1.LPModConfig(0, 1)
ar1.RfInit()